16" THERMATIC® ELECTRIC FAN (12V) (0166)
16" THERMATIC® ELECTRIC FAN (12V) (0166)
16" THERMATIC® ELECTRIC FAN (12V) (0166)

16" THERMATIC® ELECTRIC FAN (12V) (0166)

 
All Davies Craig Thermatic® Fan are packaged with fan assembly (motor, fan blade, shroud and mounting feet).

A Davies Craig Thermatic® Fan is suitable for both condenser and radiator cooling. Thermatic® Fans provide; Constant air flow, increased fuel economy, air conditioning performance, cooler engine running, low profile, high performance, increased engine power and fully reversible blades and polarity for bi-directional air flow.

These fan assemblies are set up for upstream applications.

For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.

SPECIFICATIONS
Airflow  2120 CFM (ft3/min)
Maximum current  19.0A (12 Volt) 9.5A (24 Volt)
Weight  3 kg (6.6 lb)
Height = 400mm
Width= 424mm
Depth = 97mm 

 
What size Thermatic® Fan do I need?

Davies Craig has made this process extremely easy –

A). Jump onto our website, www.daviescraig.com.au/fan-fitments

B). Click onto “Fan Selection Guide” in the grey banner on the top of home page. C). Place your vehicle make and model in the spaces provided or measure your radiator core dimensions (width, height and depth, (being the distance from the front of the engine to back of the radiator core).

The “Fan Selection Guide” will simply give you the appropriate fan options for your radiator to make a safe and correct choice.


If your car make is not listed in our Fan Selection Guide or the Model Selection Guide (see the Davies, Craig website, www.daviescraig.com.au/catalogues) we suggest the following:

  1. Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to “Fan Models” to check which fan/s will fit your core.
  2. Davies Craig Thermatic® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below.
  3. In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position.
    Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other.
  4. If you require advice, please contact Davies, Craig for assistance.